240D/241D

*Aluminum oxide on a durable X wt. cotton backing

*240D is an open coat belt that provides good cut with less loading

*241D is a closed coat belt that provides great finish

*Excellent all-around abrasvie belt for everyday use

251U

*Aluminum oxide on E wt. paper - open coat

*Excellent all-purpose woodworking belt

*Excellent finishing product in fine grades

• 240A
• Premium aluminum oxide on a durable X wt. polyester/cotton cloth backing
• Open coat resists loading
• Excellent for wood and soft substrates

270D

*Premium aluminum oxide mineral open coated on a durable Y weight backing

*Designed for intermediate wood sanding operations where premature loading or clogging may be a problem

• Premium aluminum oxide mineral on a heavy F wt. paper backing
• 362UZ is an open coat belt that provides good cut with less loading
• Excellent general use, long lasting paper belt
• 3M Xodust Technology reduces static and airborne dust level when coupled with an efficient dust collection system

• Premium aluminum oxide mineral on a heavy F wt. paper backing
• 363UZ is a closed coat belt that provides great finish
• Excellent general use, long lasting paper belt
• 3M Xodust Technology reduces static and airborne dust level when coupled with an efficient dust collection system

• 3M Cubitron Abrasive Grain on a heavy cloth backing, open coat
• Provides extremely long life, and uniform finish
• Performs well on wood species
• Reduced burning when performing "end-grain" sanding applications
• 3M Xodust Technology reduces static and airborne dust levels when used with an efficient dust-collection system

• Aluminum oxide on a durable X wt. cotton cloth backing
• 240D is an open coat belt that provides good cut with less loading
• Excellent  all-around abrasive belt for everyday use

• 761D (Purple)
• 3M Cubitron Abrasive Grain and premium aluminum oxide blended minerals on a havy Y wt cloth backing
• Film splice allows for the belt to be run bi-directional
• Purple color indicates leading edge technology . . . designed to provide you with the lowest possible manufacturing cost.

• 240/241D
• Aluminum oxide on a durable X wt. cotton cloth backing
• 240D is an open coat belt that provides good cut with less loading
• 241D is a closed coat belt that provides great finish
• Excellent all-around abrasive belt for everyday use

• 970DZ
• Premium Purple belt featuring 3M Cubitron Abrasive Grain on a havy cloth backing, open coat
• Provides extremely long life and uniform finish
• Peforms well on all wood species
• Reduced burning when performing "end-grain" sanding applications
• 3M Xodust Technology reduces static and airborne dust levels when used with an efficient dust-collection system

• Curved thin bristles sweep into grooves, crevices, carvings, inset corners and other tricky, to-finish areas
• Use for light sanding and polishing, vein sanding, defuzzing, denibbing and sanding raised grain between sealer coats
• Slow-wearing resin construction
• Non loading
• Safe handling and operation-no flying wires
• Use on die grinders (3200 RPM or less) or an electric or pneumatic drills with operating speeds of 1500-3200 RPM

• 300D
• Aluminum oxide - J wt. Cloth
• Excellent for all types of wood sanding
• Flexible cloth backing provides excellent durability
• Open coat resists loading
• Individual discs with liners

• 415U/415N
• Silicon carbide - A wt. Paper
• General purpose discs for whitewood and sealer sanding
• Load resistant coating
• Unique construction provides excellent finish
• Convenient disc roll form, 125 or 250 discs per roll

• 216U
• Aluminum oxide - A wt. paper
• Load resistant coating
• Convenient disc roll form, 125 - 175 discs/roll

• 236U
• Aluminum oxide - C wt. paper - open coat "Gold Color"
• Durable, tear resistant backing
• Load resistant coating
• Convenient disc roll form, 100 discs per roll

• 255L
• Aluminum oxide - strong, flexible, tear resistant film backing - "Gold Film"
• Provides sharp cut, durability, outstanding finish
• Longer, heat-resistant life
• Load resistant coating
• Convenient disc roll form, 125 discs per roll

• 900DZ
• Premium Purple disc-durable, long lasting 3M Cubitron Abrasive Grain
• J wt cloth - open coat
• Flexible, tear resistant cloth
• 3M Xodust Technology reduces static and airborne dust levels when copuled with an efficient dust-collection system
• Individual discs with liner

• Stikit Disc Pads
• Use with Stikit Discs
• Good adhesion, easy removal
• Durable plastic Hub
• Conformable foam body

• Sturdy, durable high strength
• Good adhesion for Stikit Sheet-Rolls and Stikit Sheets

415U/415N

The stikit refill roll system is designed for your comfort and utility.  The blocks are made of tough plastic for long life and durability.  They allow you to sand into corners with the flat end and into curved or controued areas with the rounded end.  When the abrasive on the surface is used up, simply peel back the used portion, and pull down on the roll end to expose fresh abrasive.  The abrasive used is silicon carbide coated on an A wt. paper backing with a load resistant coating.

3M Hookit Abrasives

3M Hookit abrasive discs are attached using a conventional hook and loop system

• Easy to change an dreuse the disc
• Discs attach firmly to the backup pads
• Clean removal from the backup pad

Hookit Gold Film Disc 255L

• Aluminum oxide - strong, flexible, tear resistant film backing
• "Gold Color" film backing provides sharp cut, durability, outstanding finish
• Load resistant coating
• Longer life

• 734U/334U
• C wt. paper
• Sharp-cutting and durable
• Ideal for wood, soft metals, fiberglass and solid surface

• 3M Microfinishing Film 366L
• Micron graded for consistent finishes with no wild scratches
• Use for leveling and finishing acrylic and polyester solid surfaces

• Conformable foam body
• Durable plastic hub

• Low profile for imporoved accessibility
• Less conformability

• Soft foam body
• For fine finishing and outstanding conformability

• For use with 5" Hookit D/F discs
• Soft foam construction
• Recommended for grades 220 and finer

• 248D
• Aluminum oxide - X wt. Cloth
• Heavy duty cloth backed discs for more agressive applications
• Provides excellent adhesion while removing easily

110N - General Use

•    A wt. paper, garnet mineral
•    Open coat for non-loading
•    Traditional choice for woodworkers for producing fine finishes

140N - General Use

•    D wt. paper, garnet mineral
•    Open coat for non-loading
•    Choice of many cabinet makers and woodworkers

216U - Engineered

•    Aluminum oxide - A wt. paper
•    Provides an agressive open coat material
•    Designed for final hand or machine sanding of wood; also serves well for finishing, sealer sadning or defect repair 

405 N - Engineered

•    A wt. paper - open coat
•    Ideal for dry sanding between coats of varnish and other wood finishes
•    Provides exceptional finishes and excellent conformability for contour sanding
•    Silicon carbide cuts fast and satin smooth

415U/415N - General Use

•    A wt. paper - open coat
•    Surface treated with load resistant coating to extend abrasive life.

435N - Engineered

•    C wt paper, silicon carbide mineral
•    Open coat and load resistant coating

413Q - General Use   

• Silicon carbide - A wt. paper
• Excellent conformability

Scotch-Brite Hand Pads

Excellent products for hand finishing and cleaning of composites.  Ideal for wood finishing, paint prep, general cleaning.

•    Sealer scuffing
•    Defuzzing white wood
•    Denibbing coatings
•    Scuffing between coats
•    Produce a final hand rubbed finish

• Highly conformable Scotch-Brite web can be cut to desired length
• For hand sanding or oscillating sanders

• Handy dispenser package
• Tough, highly conformable and sharp-cutting
• Great for cleaning and finishing surfaces by hand
• Denibbing coatings

• Abrasive on three sides
• Conformable flexible and convenient

• Abrasive on two sides
• Conformable flexible and convenient

• Abrasive on on side
• Conformable flexible and convenient

• Ideal for both flat and contoured surfaces such as raised panel doors and cabinets
• Easy to hold and comfortable to use

• Flat, flexible pads conform to almost any surface
• Designed specifically for highly contoured surfaces like spindles, handrails, corners and crevices

• Gives fast tack with foam tearing strenght and a soft, non-dimpling glue line
• General upholstery foam pieces together to save foam, to form foam shapes by knife edge bonding, boxing and edge turning
• It attaches foam to metal and bonds most fabrics
• Precise spray control

            *Meets current California Air Resource Board aerosol adhesive VOC limits

• High coverage, fast, aggressive tack, and a long-bonding range
• Versatile-securley bonds most lightweight material, plus it has low soak-in for long-lasting bonds
• Excellent for jobs in display and furniture-it bonds thin decorative film, foils and fabrics

            *Meets current California Air Resource Board aersol adhesive VOC limits

• High contact strength and a one-minute dry time
• Bonds decorative laminates to tables, cabinets, and shelving, kick plates to desks, and plastic sign lettering to wood
• Adheres polyethylene and polypropylene to wood, metal, and more

            *Meets current California Air Resource Board aerosol adhesive VOC limits.

• Quickly adheres edge bonding to flat and curved surfaces
• Cabinets-laminate surfaces

• Easy to control
• Removes adhesive residue

• Leaves surfaces clean and dry
• No residue
• Citrus-based

• Water-dispersed high solids activated adhesive
• Provides immediate bonding without forced drying
• Post-formable and heat resistant

• Water-based
• High viscosity verison of 3M Fastbond Contact Adhesive 30NF for roll coating

• Water-based
• Spray, roll or brush apply
• Post-formable and heat resistant

• Water-based
• Spray, roll or brush apply
• Post-formable and heat resistant

• Sprayable, neoprene, contact adhesive rapidly builds strength
• Bonds high pressure plastic laminates to wood, particle board, metal and other surfaces
• Heat and creep resistant bond

• Neoprene contact adhesive.  Can be applied with brush or roller
• Bonds high pressure plastic laminates to wood, particle board, metal and other surfaces
• Heat and creep resistant bond

• Sprayable neoprene contact adhesive provides a long bonding range and excellent intial strength
• Adheres exceptionally well to many decorative plastic laminates, cloth, wood, and foamed glass
• Meets all requirements of MIL-A21366A-121

• A combination of bond strength, cure time, and viscosity
• These clear, one-part, cyanoarylate instant adhesives reach handling strength at room temperature in five to ten seconds without a catalyst
• A single drop per square inch can bond many plastics, rubber, metal, etc. with tensile strength up to 5,000 PSI
• Base material is Ethyl
• Resistance to any fuels, lubricating oils, and other chemicals from -40*C/-40*F to 93*C/200*F gap filling; extended cure rates for repositionability; high peel and impact strength

• 100% solid, solvent free thermoplastic resins
• Assemblies can be moved immediately
• No space or energy consumed for drying
• Also available in low temperature applied versions
• Reaches handling strength in seconds
• Applied through 3M Polygun Applicators

• For improved productivity
• Holds up to four 10 fl. oz. cartridges
• 12 month warranty
• Optional tips are available for various outputs and specific applications

Use almost anywhere slamming, scratching, nicking, scuffing, marring, sliding, vibration, or noise could be a problem for your product.

• Feet on the bottom of electronic cabinetry, scales, clocks, speakers, dispensers, and computers
• Stops for cabinet doors, lids, and drawers
• Spacers for picture frames to provide alignment
• Protectors for stacked glass and wood panels

3M Bumpon Protective Products feature a plasticizer-free urethane composition which exhibits:

• Excellent skid resistance
• Long aging resiliency-will not crack or harden
• Alternative to mechanical fasteners
• Resistance to marring, staining and abrasion

A new, innovative system for mixing and preparing finish material prior to spraying.

• Up to 70% saving of cleaning solvent
• Only on PPS cup for mixing and spraying
• Closed system--no outside contamination
• Faster system--from mixing to disposal
• Less operator exposure to solvents and reduction of VOCs
• Spray gun functions at any angle

• Excellent for clean-up just before painting
• Removes dirt, lint, dust and sanding particles
• Stays soft
• Use again & again
• Final step in surface prep prior to finishing
• Leaves no drag marks behind while dust is drawn into the tack pad

• A multi-purpose cleaner which will dissolve and flush away dirt, frease, tar, most non-curing type adhesive films, and similar substances
• It is a citurs oil based cleaner that emulsifies when flushed with water
• It contains no petroleum distillate's
• Can be used to clean and degrease metal parts, motors, tools, concrete
• Contains no ozone depleting chemicals

• Easy to use
• Stays in place on fingers
• Comfortable/Cooler
• Maintains your sense of touch

• Fast drying, long lasting
• Contains no petroleum oils
• 350*F (177*C) temperature resistance
• Won't stain or become gummy
• Lubricate cutting tools and tables
• Helps prevent build-up of glues, wax, inks, paints
• Should not be used near painting, staining or varnishing production areas

• Penetrates, lubricates, demoisturizes, cleans and helps prevent rust
• Frees rusted, frozen nuts
• "Dries out" electrical apparatus
• Inhibits corrosion and pitting of molded dies and extension screws

• For use over properly prepared wood surfaces, with creme hardener
• Cures tack-free in 15-20 minutes
• Features glass bubbles, making it easy to sand
• Ideal for a filler for paint-grade cabinets

• N95

• Lightweight
• Low profile designed filter
• For use with 3M Half and Full Facepieces 5000, 6000, and 7000 Series with bayonet attachments
• MIOSH approved for enironments containing certain oil and non-oil based particles

The economical, accurate way to monitor your workplace

3M Air Monitors are simple and effective devices that collect certain airborne contaminatnts using the scientific principle of diffusion.  They meet or exceed +25% accuracy at a 95% confidence level for many workplace contaminants.

• Note: Please see www.3M.com/occsafety for technical data bulletins on the monitors, the Organic Vapor Monitor Sampling and Analysis Guide and analysis methods.

• Single charcoal sorbent wafer for easy collection or organic vapors
• Sampling and analysis guide for over 125 vapors available
• 3510-includes analysis for up to three compounds per monitor, selected from a list of more than 80 vapors

• Metal dispensers for Stikit disc rolls
• This dispenser holds two disc rolls

• Micron graded for consistent finishes with no wild scratches
• Use for leveling and finishing acrylic and polyester solid surfaces

• Use after leveling step
• Consistent cut rate and longer life than other conventional abrasives
• Mist the surface with water durnig use
• Often eliminates the need for mess compounds

• Delivers high cut, long life and fine finish
• Used to achieve low gloss finishes (less than 45) on solid surface materials
• Aluminum Oxide mineral

• Non-abrasive disc used as a carrier for a polishing compound
• Use with 3M Finesse-it Compound to achieve high gloss on solid surface material (80 and higher)

• Superflexible non-woven backing for polishing of interior shapes and contours
• Precision micron grading for uniform, consistent finish
• Use damp on solid surface material to achieve high gloss (80+)

3M has developed a wide range of high strength tapes, resistant to abrasion, moisture and scuffing, for the bundling and reinforcing challenges faced in the industrial marketplace.  Applications for these high performance products can vary dramatically -- from tabbing the end lap of metal coils to stabilizing pallets to reinforcing large bulk containers or just a single carton.

These tapes balance tensile strength and adhesive holding power, even under extreme conditions, providing secure, cost-effective solutions for a variety of strapping, bundling and reinforcing applications.

With Scotch Box Sealing Tapes, you have the flexibility to seal boxes in a wide range of environments for durable and secure closure in packing stations.  The tape is tough enough to resist score-line breaking and center-seam splitting, even when subject to rough handling.

Features:  Strong backing with pressure-sensitive hot melt synthetic rubber resin adhesive assures reliable closures.  A variety of hand-held dispensers allow for quick and easy application.

Wheel Adapter Kit No. 3

• Two arbor hole (plug type) adapters for 6" and 8" diameter flap wheels
• 1" O. D. x various I.D.'s

• Metabo Grinders - Marathon motor with dust proof protection for long life
• Metabo Grinders - epoxy resin coatings on motor windings for protection from overheating under load
• 5" Metabo Polisher - Low RPM angle grinder recommended for use with HTC EZgrind™ Series

• Easy to control with joystick and touch screen
• Easy to manoeuvre with computerised articulated frame steering
• Height-adjustable grinding heads make tool replacement easy
• Particle-filtered diesel motor enables indoor use
• Integrated suction system for handling grinding waste
• Hydrobox-mounted cab that insulates against all vibrations
• The machine is modular for simple servicing
• Adjustable grinding pressure
• Ergonomically constructed with option for multiple accessories
• Tasteful design with integrated systems
• Grinding width 2.4 m
• The grinding heads have 3 x 15 kW motors

• Inhalation of dangerous crystalline silica dust.
• Risk to other building occupants and tradesmen.
• Improper handling and disposal of crystalline silica dust.
• Hundreds of hours of wasted time and labor for manual clean-up.
• EPA/OSHA enforcement based on proposed higher standards in air quality.

• Microfiber blend of Polyamide and Polyester for quick-drying
• Positively charged fibers for greater absorbency
• Ideal for Floors, Corners, Walls and Ceilings
• Densely constructed to withstand hundreds of launderings
• Picks up and holds dirt and harmful bacteria
• Holds up to 7 x its weight in water
• Pad Holder and Handle sold Separately

• 3+3: 3.57 in² of segment allows the operator to apply more pressure and is less stressful on the grinder.
  12.56 in² of grinding area is nearly double that of a standard cup wheel
  Best for epoxy removal, carpet glue and mastic removal and profiling hard concrete (new concrete with curing compound).



• 6+3: 5.82 in² of segment; 12.56 in² of grinding area in motion
  Best for general surface preparation, removing paint, thin mil epoxy coatings and crystalized glue and mastic.



• 9+9: 10.71 in² of segment; the best combination of life, production and value. Use with 15+ amp grinder for best results.
  Best for removing abrasive coatings such as quartz floors, preparing soft concrete and removing thin coatings and tile thin set.