COMPANY HEADER
Request Information
Composition
Rapid Refloor Pit Grout is a two component, 100% solids structural polyurethane/polyurea hybrid. When cured, Rapid Refloor Pit Grout is a rigid structural polymer with a Shore D Hardness of 70 to 75.

Basic Use
Rapid Refloor Pit Grout was developed to fill/repair concrete floor surface imperfections such as air holes, pop-outs, surface pitting, scratches and gouges, etc. It can also be blended with dry aggregate to produce a repair mortar for various concrete deficiencies.

Rapid Refloor Pit Grout is designed for use in commercial or retail polished concrete floors where final building temperatures are 32 ºF (0 ºC) to +120 ºF (49 ºC).
Unit of Measure

Viscosity Profile

Part A

 N/A 228 cps

Part B

 N/A 50 cps

Mixed

 N/A 139 cps

Reaction Profile

Potlife in Mixing Nozzle (70 ºF/21 ºC)1 N/A 1 to 1.5 m

Working Time

 N/A 3 to 4 m

Tack Free Time

 N/A 15 m

Grindable

 N/A 45 m

Typical Physical Properties

Shore D Hardness

 N/A 70 to 75

Compressive Strength (ASTM D-638)

 N/A 3550 psi

Tensile Strength (ASTM D412)

 N/A 5100 psi

Elongation (ASTM D412)

 N/A 7.0 to 9.0 %

Die C Tear Strength (ASTM D624)

 N/A 380 pli

Mix Ratio (by Volume)

 N/A 1:1

Odor

 N/A Minimal

Shrinkage

 N/A Negligible

Limitations

Limitations

 N/A
  • Depending upon surface conditions and/or environmental conditions more than one coat of product may be required.

  • Rapid Refloor Pit Grout may exhibit slight color change or shifting if exposed to UV emitting lighting sources.

  • Rapid Refloor Pit Grout will exhibit a moisture reaction on damp or wet surfaces; repair area should be dry.

Specifications

Color

 N/A Standard colors are Natural (translucent amber), Warm Stone and Porpoise as shown on the ColorFast Color Chart. Rapid Refloor Pit Grout is also available in over 48 ColorFast Colors or custom colors by special order.

Packaging

Packaging

 N/A Standard Packaging: 1500 ml (750x750) dual cartridge kit.
Optional Packaging: 600 ml (300x300) dual cartridge kit.

Use in USDA/FDA Regulated Facilities

Use in USDA/FDA Regulated Facilities

 N/A Rapid Refloor Pit Grout is acceptable for use in floors subject to USDA and FDA inspection and regulation.

Applicable Specifications

Applicable Specifications

 N/A There are no applicable government or ATSM standards for structural polyurea/polyurethane repair products.

Availability

Availability

 N/A Rapid Refloor Pit Grout is available through authorized distributors or through our NH headquarters.

Advantages

Advantages

 N/A
  • Available in over 48 ColorFast Colors to best camouflage floor surface pitting and surface imperfections.
  • Rapid set formula allows for quick access to floor areas and grinding as early as 45 minutes after application.
  • Low viscosity allows for penetration into very small, micro-level surface pits and imperfections.
  • Yields a smoother, denser floor surface
  • 100% solids, minimal odor formula
  • 1 Thin Film, 70 ºF/21 ºC Sample