COMPANY HEADER
Request Information
Creating Clean Air for Construction, Abatement, and Restoration

Guaranteed to keep up with any grinder on the market today and save you time and money! Clearly, today's concrete grinders and diamonds are more efficient. However, in the process of creating great looking floors, these grinders and diamonds create a tremendous dust problem. This dust problem must be addressed intelligently to protect your employees and business from the following risks:
  • Inhalation of dangerous crystalline silica dust.
  • Risk to other building occupants and tradesmen.
  • Improper handling and disposal of crystalline silica dust.
  • Hundreds of hours of wasted time and labor for manual clean-up.
  • EPA/OSHA enforcement based on proposed higher standards in air quality.
Unit of Measure

Specifications

Power

 N/A 17.4 hp

Voltage

 N/A 480 V

Current

 N/A 21 A

Airflow

 N/A 647 cfm

Water Lift

 N/A 140

Height

 N/A 49 in

Width

 N/A 27 in

Length

 N/A 69 in

General Description

General Description

 N/A The T12600 is truly unique in the industry. With its incredible power (17.5HP 647CFM) and massive pre-filter area (over 40 sq. ft.), the T12600 will change the way many contractors choose to grind and polish concrete floors.

Connecting a single grinder to the T12600? Go ahead and don't worry about using a pre-separator! The T12600 will allow you to grind for an entire work shift without a pre-separator and without stopping your grinder to clean or purge filters.

If you wish to run two grinders, just add a C5500 pre-separator between each grinder and the T12600. You will still have plenty of airflow and filter efficiency to grind uninterrupted for hours! One grinder, two grinders, three-head or four-heads, it doesn't matter! The T12600 will improve grinder performance, and eliminate that leftover layer of dust on the floor and the extra labor to remove it. This incredible HEPA Dust Extractor will pick it all up, even on the first cut, and leave your floor clean and ready for the next step.

Features

Features

 N/A
  • Jet Pulse: to clean prefilter and maintain airflow
  • Coated Pre-Filter Socks: 25 multi-layered
  • Tilt Handle: for opening cylonic chamber for pre-filter replacement
  • HEPA Filter Compartment: 4 each cylindrical tested and certified HEPA filters. Each filter provides a minimum efficiency of 99,99% at 0.3 microns
  • Airflow Shut-Off Valve: for Jet pulse pre filter cleaning
  • Optional Onboard Distribution Box: for connecting grinder to vacuum
  • Steel Clamps: corrosion resistant, secures vacuum during transport
  • Turbine Motor: 17.4 HP, 3-phase, 480 V 60 HZ, 3525 RPM
  • Tie Wrap Storage
  • Welded Steel Platform: to support sealed Longopac bag
  • 10" Rear Tires: smooth, easy transport over floor obstructions