COMPANY HEADER
Print Back
Stain Resistance to the Second Power

Ameripolish® SR²™ is part of a two-component penetrating stain repellent specifically formulated to protect polished, dyed and non-dyed concrete from oil, water-based stains and acidic etching agents.

Designed specifically for protecting non colored and colored polished concrete floor. To obtain optimum performance, Ameripolish® SR²™ is to be used with Ameripolish® 3D (HS or HSL) Densifier. Ameripolish® can also be used with dyes and densifiers from other manufacturers; however, optimum stain resistance and color retention cannot be assured.
Ameripolish® SR²™ Penetrating Stain Resistors
Unit of Measure
Items Ameripolish® SR²™ Penetrating Stain Resistors
SR2-1
SR2-1, Ameripolish® SR²™ Penetrating Stain Resistor 		Ameripolish® SR²™ Penetrating Stain Resistors
SR2-5
SR2-5, Ameripolish® SR²™ Penetrating Stain Resistor 		Ameripolish® SR²™ Penetrating Stain Resistors
SR2-30
SR2-30, Ameripolish® SR²™ Penetrating Stain Resistor 		Ameripolish® SR²™ Penetrating Stain Resistors
SR2-55
SR2-55, Ameripolish® SR²™ Penetrating Stain Resistor 		Ameripolish® SR²™ Penetrating Stain Resistors
SR2-250
SR2-250, Ameripolish® SR²™ Penetrating Stain Resistor
Application N/A Spray and Ameripolish® Microfiber Pad
Appearance N/A Clear
VOC N/A Compliant (5 g/L)
Shelf Life N/A 1 Year
Solvent N/A Proprietary (non-hazard)
Volume (RTU) N/A 1 gal N/A 5 gal N/A 30 gal N/A 55 gal N/A 250 gal
Minimum Coverage N/A 3000 ft² N/A 15000 ft² N/A 90000 ft² N/A 165000 ft² N/A 750000 ft²
Maximum Coverage N/A 5000 ft² N/A 25000 ft² N/A 150000 ft² N/A 275000 ft² N/A 1250000 ft²
Container(s) RTU: Ready to Use N/A 1 gal N/A 5 gal N/A 30 gal N/A 55 gal N/A 250 gal
Features N/A
  • Oil and food stain resistance
  • Excellent stain protector for industrial applications
  • Long-lasting protection
  • High coverage rate
  • Non-topical penetrating
  • Safe for surfaces that experience high traffic
  • Few instances of color change (slightly darkens concrete)
  • Non Flammable
  • Treated surfaces "breathe" and do not trap moisture
  • Compatibility to bond with SureLock™ Color System components to protect color
  • Provides a chance to clean up spills before they stain or etch a surface
Ameripolish® SR²™ Penetrating Stain Resistor offers VOC compliance with low VOC at 5 g/L and is compliant with several national, state and district regulations:
US Environmental Protection Agency
California Air Resources Board SCM Districts (Before application, verify product Conformance with local and state codes.)
South Coast Air Quality Management District (Before application, verify product Conformance with local and state codes.)
Maricopa County, AZ
Northeast Ozone Transport Commission
Caution N/A Before using Ameripolish SR²™, read the MSDS and Technical Data Sheets. Use good hygiene when handling this product. Wash hands and any areas that come into direct contact with this material.
Warranty N/A The information contained herein is believed to be reliable. This information is based on laboratory testing and results. Because of variations in methods, conditions and equipment, each user must test this product to make a judgment of performance. Applicator is responsible for testing material for effectiveness and performance. Manufacturer obligation is limited to the refund of purchase price or replacement of material if proven to be defective. Claims must be made in writing and received within one year from date of product sale to original buyer. Sole remedy shall be replacement of product proven defective.